电容式位移传感器的线性度标定与不确定度评定

葛川; 张德福; 李朋志; 郭抗; 李佩玥; 杨怀江

doi:10.3788/OPE.20152309.2546

您当前的位置：

首页 >

文章列表页 >

电容式位移传感器的线性度标定与不确定度评定

微纳技术与精密机械 | 更新时间：2020-08-12

- 电容式位移传感器的线性度标定与不确定度评定
- Linearity calibration and uncertainty evaluation for capacitance displacement sensor
- 光学精密工程 2015年23卷第9期页码：2546-2552
- 作者机构：
  
  中国科学院长春光学精密机械与物理研究所应用光学国家重点实验室超精密光学工程研究中心,吉林长春,130033
- 作者简介：
- 基金信息：
  
  02重大专项资助项目(No.2009ZX02205)()
- DOI：10.3788/OPE.20152309.2546
  中图分类号： TP212.13
- 收稿日期：2014-12-05，
  
  修回日期：2015-02-07，
  
  纸质出版日期：2015-09-25
- 稿件说明：
移动端阅览
葛川, 张德福, 李朋志等. 电容式位移传感器的线性度标定与不确定度评定[J]. 光学精密工程, 2015,23(9): 2546-2552

GE Chuan, ZHANG De-fu, LI Peng-zhi etc. Linearity calibration and uncertainty evaluation for capacitance displacement sensor[J]. Editorial Office of Optics and Precision Engineering, 2015,23(9): 2546-2552
葛川, 张德福, 李朋志等. 电容式位移传感器的线性度标定与不确定度评定[J]. 光学精密工程, 2015,23(9): 2546-2552 DOI： 10.3788/OPE.20152309.2546.

GE Chuan, ZHANG De-fu, LI Peng-zhi etc. Linearity calibration and uncertainty evaluation for capacitance displacement sensor[J]. Editorial Office of Optics and Precision Engineering, 2015,23(9): 2546-2552 DOI： 10.3788/OPE.20152309.2546.

摘要

由于光刻投影物镜装调中电容传感器的线性度指标不能够满足位移调节精度的需求

本文提出了一种提高电容传感器测量线性度的方法。该方法采用压电驱动器提供位移进给;采用高精度激光测长干涉仪校准电容传感器的线性度

提供位移反馈以保证运动控制精度。采用高阶曲线拟合方法得到拟合系数对传感器线性度进行在线标定;对标定实验中的环境、安装、机构以及控制等进行不确定度分析与评定以保证电容传感器的线性度测量精度;最后进行电容传感器线性度的标定实验。实验结果表明:本文提出的线性度标定方法能够减小各误差项对于测量结果的影响

标定后传感器线性度由0.047 14%提高至0.004 84%

近一个数量级

并且线性度重复性较高

重复性偏差为0.38 nm

全行程内线性度的合成不确定度为5.70 nm

能够满足光刻物镜中位移控制精度的需求。

Abstract

As the linearity of capacitance sensor in adjusting a lithographic projection objective could not meet the requirement of the adjustment mechanism for accuracy standard

a method to improve the measuring linearity of the capacitance sensor was proposed. A piezoelectric actuator was used to provide displacement feeding and a higher precise laser length interferometer was used to provide displacement feedback to ensure the accuracy of moving control. The fitting factors getting from the high order curve fitting were used to calibrate the linearity of the capacitance sensor online. Then

the uncertainties of the environment

installation mechanism and control were analyzed and evaluated to meet the accuracy of the linearity measurement. Finally

calibration experiments for the sensor were carried out. The experiment results indicate that the calibration method of the linearity proposed reduces the influence of the error on the measurement results. After calibration

the linearity of capacitance sensor increases from 0.047 14% to 0.004 84%

nearly an order of magnitude. Moreover

the capacitance sensor has high linearity repeatability

the deviation of repeatability is 0.38 nm

and the combined uncertainty of the linearity in the whole stroke is 5.70 nm

which meets the displacement control accuracy of the lithographic projection objective.

关键词

Keywords

references

FUKAGAWA Y, SHINANOY J, et al.. Optimum adjustment for distortion in semiconductor lithography equipment [J]. Advanced Mechanical Design Systems and Manufacturing,2008,2(3):378-382.

李朋志,葛川,苏志德,等. 基于动态模糊系统模型的压电陶瓷驱动器控制[J]. 光学精密工程,2013,21(2):394-399. LI P ZH, GE CH, SU ZH D, et al.. Open-Closed loop iterative learning control of piezoelectric actuators [J]. Opt. Precision Eng., 2013,21(2):394-399. (in Chinese)

郭抗,巩岩. 6-PSS型光学元件精密轴向调节机构[J]. 光学精密工程,2013,21(10):2648-2655. GUO K, GONG Y. Precise axial adjustment mechanism with 6-PSS type of optical elements [J]. Opt. Precision Eng., 2013,21(10):2648-2655. (in Chinese)

许伟才,黄玮,杨旺. 投影光刻物镜倍率的公差分析与补偿[J]. 光学学报,2011,31(11):1122003. XU W C, HUANG W, YANG W. Magnification tolerancing and compensation for the lithographic projection lens [J].Acta Optica Sinica, 2011, 31(11):1122003.(in Chinese)

谷勇强,苗二龙,隋永新. 双球面法标定立式参考球面的精度分析[J]. 光学精密工程,2012,20(3):527-533. GU Y Q, MIAO E L, SUI Y X. Accuracy analysis on calibrating vertical spherical reference by two-sphere method [J]. Opt. Precision Eng., 2012,20(3):527-533. (in Chinese)

BRICH K P, DOWNS M J. Correction to the updated Edlen equation for the refractive index of air [J]. Metrologia, 1994,31(4):315-316.

秦硕,巩岩,袁文权,等. 大时间热响应常数投影物镜的超高精度温度控制[J]. 光学精密工程,2013,21(1):108-114. QIN S, GONG Y, YUAN W Q, et al.. High precision temperature control for projection lens with long time thermal response constant [J]. Opt. Precision Eng., 2013,21(1):108-114. (in Chinese)

BRDAYS M A, GROCHOWSKI M,GMINSKI, et al.. Hierarchical predictive control of integrated wastewater treatment systems [J]. Control Engineering Practice, 2008,16(6),751-767.

SCHMITZ T L, KIMA H S. Monte Carlo evaluation of periodic error uncertainty [J]. Precision Engineering, 2007, 31(3):251-259.

AVRAMOV Z S, LEE R D.A high-stability capacitance sensor system and its evaluation [J]. IEEE Transactions on Instrumentation Measurement, 2009, 58(4):955-961.

BAHREYNI B, WIJEWEERA G, SHAFAI C, et al..Analysis and design of a micromachined electric-field sensor [J]. Journal of Microelectromechanical Systems, 2008,17(1):31-36.

赵磊,巩岩. 光刻物镜中透镜高精度支撑结构的设计及分析[J]. 光学学报, 2012, 32(9):0922001. ZHAO L, GONG Y. Design and analysis for the high-precision lens support structure of objective lens forlithography [J]. Acta Optica Sinica, 2012, 32(9):0922001. (in Chinese)

秦伟,苑伟政,常洪龙,等. 基于自适应UKF算法的MEMS陀螺空中在线标定技术[J]. 中国惯性技术学报, 2011, 19(2):170-174. QIN W, YUAN W ZH, CHANG H L, et al.. In-flight on-line calibration method for MEMS gyroscope based on adaptive unscented Kalman filter algorithm [J].Journal of Chinese Inertial Technology, 2011, 19(2):170-174. (in Chinese)

浏览量

453

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

平行双关节坐标测量机的标定及不确定度评价

基于多位姿标靶的激光跟踪姿态测量系统参数标定

光开关切换延时线自动标定与控制系统

面结构光测量曲面特征的不确定度评估

基于各向异性误差相似度的六自由度机器人定位误差补偿