激光跟踪仪精密跟踪系统的设计

董登峰; 周维虎; 纪荣祎; 张滋黎; 劳达宝

doi:10.3788/OPE.20162402.0309

您当前的位置：

首页 >

文章列表页 >

激光跟踪仪精密跟踪系统的设计

现代应用光学 | 更新时间：2020-08-13

- 激光跟踪仪精密跟踪系统的设计
- Design of precise tracking system of laser tracker
- 光学精密工程 2016年24卷第2期页码：309-318
- 作者机构：
  
  中国科学院光电研究院, 北京 100094
- 作者简介：
- 基金信息：
  
  国家重大科学仪器设备开发专项基金资助项目(No.11YQ120022)();精度测试技术及仪器国家重点实验室(天津大学)开放课题(No.PIL1503)();中国科学院
- DOI：10.3788/OPE.20162402.0309
  中图分类号： TP273.3;TN247
- 收稿日期：2015-10-12，
  
  修回日期：2015-12-07，
  
  纸质出版日期：2016-02-25
- 稿件说明：
移动端阅览
董登峰, 周维虎, 纪荣祎等. 激光跟踪仪精密跟踪系统的设计[J]. 光学精密工程, 2016,24(2): 309-318

DONG Deng-feng, ZHOU Wei-hu, JI Rong-yi etc. Design of precise tracking system of laser tracker[J]. Editorial Office of Optics and Precision Engineering, 2016,24(2): 309-318
董登峰, 周维虎, 纪荣祎等. 激光跟踪仪精密跟踪系统的设计[J]. 光学精密工程, 2016,24(2): 309-318 DOI： 10.3788/OPE.20162402.0309.

DONG Deng-feng, ZHOU Wei-hu, JI Rong-yi etc. Design of precise tracking system of laser tracker[J]. Editorial Office of Optics and Precision Engineering, 2016,24(2): 309-318 DOI： 10.3788/OPE.20162402.0309.

摘要

对激光跟踪仪的跟踪伺服控制系统进行了整体研究并给出了总体设计方案。针对跟踪目标的精密探测问题

研究了新型探测手段以及微弱光电信号的精细调理技术与数字滤波方法

使得脱靶量探测稳定性优于2.0m。针对跟踪角度精密测量问题

设计了圆光栅数据采集系统

实现了角度脉冲的细分、辨向与准确计数;基于谐波分析方法建立了跟踪过程中的误差补偿模型

将角度测量精度由3.5"提高到1.5"。建立了跟踪伺服电机的数学模型

分析了电流环在跟踪控制中的作用机理

提出了电流、速度、位置三闭环控制结构和复合跟踪控制策略。跟踪实验表明:系统最远跟踪距离不小于41.7 m

跟踪速度不低于2.0 m/s。该项技术还能为空间动态目标跟踪、激光通信等提供有益借鉴。

Abstract

This paper focuses on the total research of tracking servo control system of a laser tracker and gives a total design scheme. For precise detection of the miss-distance of a tracking target

new detection methods

fine adjusting technologies and digital filtering methods for weak photoelectric signals were explored

by which the detection stability for miss-distance of the tracking target could be better than 2.0m. To measure precisely tracking angles

a circular grating data acquisition system was designed

and the digital filtering

angle subdivision and accurate counting as well as data communication modules were achieved. According to the angle data

a tracking error compensation model was established based on harmonic analysis method

and the angle measurement precision was improved to 1.5 from 3.5. For tracking servo motor

a mathematical model was established to analyze the special function of current loop in tracking control process

then a three-closed-loop control structure including the current

speed

position and a compound tracking control strategy was proposed. The tracking experiment shows that the tracking distance and the tracking speed are not less than 41.7 m and 2.0 m/s respectively. The technology can also provide a useful reference for the dynamic target tracking

laser communication and so on.

关键词

Keywords

references

周维虎, 丁蕾, 王亚伟, 等. 光束平差在激光跟踪仪系统精度评定中的应用[J]. 光学精密工程, 2012,20(4):851-857. ZHOU W H, DING L, WANG Y W, et al.. A visual inspection system for online measurement application of bundle adjustment to accuracy evaluation of laser tracker[J]. Opt. Precision Eng., 2012, 20(4):851-857.(in Chinese)

刘娇月, 杨聚庆, 董登峰,等. 激光跟踪仪的光电瞄准与定位系统[J]. 光学精密工程,2015, 23(6):1558-1564. LIU J Y, YANG J Q, DONG D F, et al..Optoelectronic aiming and orientation system of laser tracker[J].Opt. Precision Eng., 2015,23(6):1558-1564.(in Chinese)

王金栋, 郭俊杰, 费致根, 等. 基于激光跟踪仪的数控机床几何误差辨识方法[J]. 机械工程学报,2011, 47(14):13-19. WANG J D, GUO J J, FEI ZH G, et al.. Method of geometric error identification for numerical control machine tool based on laser tracker[J]. Journal of Mechanical Engineering, 2011, 47(14):13-19.(in Chinese)

KLAUS W, MATTHIAS F, FRANK H. Measuring large 3D structures using four portable tracking laser interferometers[J]. Measurement, 2012, 45:2339-2345.

刘永东, 王佳, 胡朝晖, 等. 距离法运动目标激光跟踪测量系统的研究[J]. 光学仪器,2001, 23(3):12-16. LIU Y D, WANG J, HU ZH H, et al.. Laser tracking system for coordinate measurement of moving target by length-measured method[J].Optical Instruments, 2001, 23(3):12-16.(in Chinese)

付继有. 多路激光跟踪干涉仪柔性坐标测量系统[D]. 天津:天津大学,1997. FU J Y. Flexible Coordinate Measuring System of Multi-Path Laser Tracker[D]. Tianjin:Tianjin University, 1997.(in Chinese)

张国雄, 李杏华, 林永兵. 多路法激光跟踪干涉测量系统的研究[J]. 天津大学学报, 2003, 36(1):23-27. ZHANG G X, LI X H, LIN Y B. Study on the multi path laser tracking measuring system[J]. Journal of Tianjin University, 2003,36(1):23-27.(in Chinese)

隋修武, 张国雄, 李杏华,等. 四路激光跟踪柔性坐标测量系统的跟踪器设计[J]. 仪器仪表学报, 2005, 26(12):1253-1256. SUI X W, ZHANG G X, LI X H, et al.. Design of the tracker in four-beam laser tracking flexible coordinate measuring system[J]. Chinese Journal of Scientific Instrument,2005,26(12):1253-1256.(in Chinese)

陈曦. 激光跟踪系统设计[D]. 天津:天津大学,2007. CHEN X. Design of a Laser Tracking System[D]. Tianjin:Tianjin University, 2007.(in Chinese)

陈新华. 球坐标法激光跟踪控制系统的研究[D]. 天津:天津大学,2010. CHEN X H. Research on the Laser Tracking Control System Based on Spherical Coordinate[D]. Tianjin:Tianjin University, 2010.(in Chinese)

张亚娟, 裘祖荣, 李杏华, 等. 基于PSD的激光跟踪坐标测量系统[J]. 传感器与微系统, 2011,30(7):116-119. ZHANG Y J,QIU Z R,LI X H,et al.. Laser tracking coordinate measurement system based on PSD[J]. Transducer and Microsystem Technologies, 2011, 30(7):116-119.(in Chinese)

张亚娟. 单站式激光跟踪坐标测量系统研究[D]. 天津:天津大学,2012. ZHANG Y J. Stand Alone Laser Tracking System[D]. Tianjin:Tianjin University, 2012.(in Chinese)

杨艳, 黄劼, 曾力. 激光跟踪仪两级双轴联动闭环控制系统研究[J]. 中国测试, 2012, 38(1):90-93. YANG Y, HUANG J, ZENG L. Study on closed-loop control system with dual-axis linkage for laser tracker[J]. China Measurement & Test, 2012, 38(1):90-93.(in Chinese)

ZHANG Z L, ZHOU W H, LAO D B, et al.. Research and development of the laser tracker measurement system[J]. SPIE, 2012,8759:87593Z1-87593Z7.

KONG L C, LI E P, YANG D X,et al.. The PSD general response function[J].IEEE Electron Transactions on Devices,2012,59(3):835-840.

张敏, 梁雁冰. 二维四边形位置敏感探测器实验研究[J]. 红外与激光工程, 2013, 42(2):459-464. ZHANG M, LIANG Y B. Experiment on two dimensional quadrilateral position sensing detector[J].Infrared and Laser Engineering, 2013, 42(2):459-464.(in Chinese)

董登峰,王博,李万红,等. 激光跟踪仪角度采集系统设计及误差修正研究[J]. 计测技术, 2014, 34(5):13-16. DONG D F, WANG B, LI W H, et al.. Research on angle acquisition system design and angle error compensation[J].Metrology and Measurement Technology, 2014, 34(5):13-16.(in Chinese)

高贯斌,王文,林铿. 圆光栅角度传感器的误差补偿及参数辨识[J]. 光学精密工程, 2010, 18(8):1766-1762. GAO G B, WANG W, LIN K, et al.. Error compensation and parameter identification of circular grating angle sensors[J]. Opt. Precision Eng., 2010, 18(8):1766-1762.(in Chinese)

赵人杰,马文礼. 利用误差谐波补偿法提高金属圆光栅测角精度[J]. 仪器仪表用户,2009, 116(3):69-71. ZHAO R J, MA W L. Improving the accuracy of new type encoders using error harmonic compensation[J]. Electronic Instrumentation Customer, 2009,116(3):69-71.(in Chinese)

KAUL S K,TICKOO A K,KOUL R, et al.. Improving the accuracy of low-cost resolver-based encoders using harmonic analysis[J].Nuclear Instruments and Methods in Physics Research, 2008,586(A):345-355.

浏览量

260

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

激光跟踪仪测角误差补偿

激光跟踪仪主动对准式复合传感高精度姿态测量

二维激光跟踪转台轴系设计及动态形变误差修正

激光跟踪仪几何结构误差标定及修正

三自由度压电偏摆台耦合迟滞模型建模与逆补偿