基于纯平移两视图几何的镜头畸变参数标定

刘阳; 刘巍; 徐鹏涛; 王灵丽; 贾振元

doi:10.3788/OPE.20162404.0922

您当前的位置：

首页 >

文章列表页 >

基于纯平移两视图几何的镜头畸变参数标定

信息科学 | 更新时间：2020-08-13

- 基于纯平移两视图几何的镜头畸变参数标定
- Calibration of lens distortion parameters based on two view geometry of translation motion
- 光学精密工程 2016年24卷第4期页码：922-929
- 作者机构：
  
  大连理工大学机械工程学院,辽宁大连,116024
- 作者简介：
- 基金信息：
  
  国家自然科学基金资助项目(No.51227004)();国家自然科学基金面上项目(No.51375075)();国家973重点基础研究发展计划资助项目(No.2014C
- DOI：10.3788/OPE.20162404.0922
  中图分类号： TP242.6;TP391.41
- 收稿日期：2015-12-02，
  
  修回日期：2016-01-12，
  
  纸质出版日期：2016-04-25
- 稿件说明：
移动端阅览
刘阳, 刘巍, 徐鹏涛等. 基于纯平移两视图几何的镜头畸变参数标定[J]. 光学精密工程, 2016,24(4): 922-929

LIU Yang, LIU Wei, XU Peng-tao etc. Calibration of lens distortion parameters based on two view geometry of translation motion[J]. Editorial Office of Optics and Precision Engineering, 2016,24(4): 922-929
刘阳, 刘巍, 徐鹏涛等. 基于纯平移两视图几何的镜头畸变参数标定[J]. 光学精密工程, 2016,24(4): 922-929 DOI： 10.3788/OPE.20162404.0922.

LIU Yang, LIU Wei, XU Peng-tao etc. Calibration of lens distortion parameters based on two view geometry of translation motion[J]. Editorial Office of Optics and Precision Engineering, 2016,24(4): 922-929 DOI： 10.3788/OPE.20162404.0922.

摘要

针对摄像机镜头畸变对系统测量精度的影响

提出了基于纯平移两视图几何的镜头畸变参数标定方法。首先

分析了机器视觉测量中影响测量精度的主要畸变类型

建立了镜头非线性畸变模型。然后

利用射影几何及纯平移两视图几何的固有特性

构建了四组约束方程用于求解畸变参数。最后

针对大视场测量时标定板无法有效充满视场的问题

提出了利用四维电控平台对视场分区域拍摄多组纯平移运动图像的畸变参数标定流程

利用较小的靶标实现了大视场的镜头畸变参数标定。在实验室验证了本文提出的畸变校正方法的可行性。结果显示:提出的方法标定精度较高

标定后图像特征点连线的直线度误差减小了89%

标定精度及可靠性均满足机器视觉测量的要求。

Abstract

In consideration of the effect of lens distortion on the measuring accuracy of a camera

a lens distortion calibration method based on two view geometry of a translation motion was presented in this paper. The main types of lens distortion affecting the measurement accuracy were analyzed

and a nonlinear distortion model was established. Then

four group equations were established for solving distortion parameters by using the inherent characteristics of projective and two view geometries. Finally

to solve the problem that the small pattern can not effectively be full of the field of view (FOV) in a large range measurement

a calibration processing of distortion parameters by acquiring multi-groups' translation motion images in sub-regional FOV was put forward

by which the calibration of the distortion parameters was implemented in a large FOV by the small pattern. The feasibility of the calibration method was verified by a library

and the results show that the calibration precision of proposed method is higher and the straightness error has reduced by 89%. The calibration accuracy and reliability of this method meet the requirements of visual measurement.

关键词

Keywords

references

RICOLFE-VIALA C, SANCHEZ-SALMERON A. Lens distortion models evaluation[J]. Applied Optics, 2010, 49(30):5914-5928.

史泽林, 康娇, 孙锐. 基于BP神经网络的大视场成像畸变校正方法[J]. 光学精密工程, 2005, 13(3):348-353. SHI Z L, KANG J, SUN R. BP NN-based method for lens distortion correction of large-field imaging[J]. Opt. Precision Eng., 2005, 13(3):348-353. (in Chinese)

艾莉莉, 袁峰, 丁振良. 照相物镜径向畸变模型的再商讨[J]. 光学学报, 2008, 28(10):1930-1933. AI L L, YUAN F, DING ZH L. Further study on radial distortion model for photographic objective[J]. Acta Optica Sinica, 2008, 28(10):1930-1933.(in Chinese)

赵振庆, 叶东, 吴斌, 等. 消隐点共线约束逐点畸变校正算法[J]. 光学精密工程, 2015, 23(4):1196-1204. ZHAO ZH Q, YE D, WU B, et al.. Point wise distortion correction algorithm with vanishing point collinear constraint[J]. Opt. Precision Eng., 2015, 23(4):1196-1204. (in Chinese)

TSAI R Y. A versatile camera calibration technique for high-accuracy 3D machine vision metrology using off-the-shelf TV cameras and lenses[J]. IEEE Journal of Robotics and Automation, 1987, 3(4):323-344.

杨必武, 郭晓松. 摄像机镜头非线性畸变校正方法综述[J]. 中国图象图形学报, 2005, 10(3):269-274. YANG B W, GUO X S. Overview of nonlinear distortion correction of camera lens[J]. Journal of Image and Graphics, 2005, 10(3):269-274.(in Chinese)

RAHMAN T, KROUGLICOF N. An efficient camera calibration technique offering robustness and accuracy over a wide range of lens distortion[J]. IEEE Transactions on Image Processing, 2012, 21(2):626-637.

徐嵩, 孙秀霞, 刘树光, 等. 一种基于正交直线构造的摄像机畸变标定方法[J]. 仪器仪表学报, 2013, 34(9):2118-2123. XU S, SUN X X, LIU SH G, et al.. Camera distortion calibration method based on orthogonal lines[J]. Chinese Journal of Scientific Instrument, 2013, 34(9):2118-2123.(in Chinese)

唐巍, 叶东, 袁锋, 等. 视觉测量系统中一种独立的畸变校正算法[J]. 光电子·激光, 2013, 24(2):308-315. TANG W, YE D, YUAN F, et al.. Independent distortion correction algorithm in vision measurement system[J]. Journal of Optoelectronics·Laser, 2013, 24(2):308-315.(in Chinese)

贺俊吉, 张广军, 杨宪铭. 基于交比不变性的镜头畸变参数标定方法[J]. 仪器仪表学报, 2004, 25(5):597-599. HE J J, ZHANG G J, YANG X M. Approach for calibration of lens distortion based on cross ratio invariability[J]. Chinese Journal of Scientific Instrument, 2004, 25(5):597-599.(in Chinese)

RICOLFE-VIALA C, SÁNCHEZ-SALMERÓN A. Robust metric calibration of non-linear camera lens distortion[J]. Pattern Recognition, 2010, 43(4):1688-1699.

RICOLFE-VIALA C, SÁNCHEZ-SALMERÓN A. Correcting non-linear lens distortion in cameras without using a model[J]. Optics & Laser Technology, 2010, 42(4):628-639.

王书民, 张爱武, 胡少兴, 等. 线推扫式高光谱相机侧扫成像几何校正[J]. 红外与激光工程, 2014, 43(2):579-585. WANG SH M, ZHANG A W, HU SH X, et al.. Geometric correction of linear push-broom hyper spectral camera side-scan imaging[J]. Infrared and Laser Engineering, 2014, 43(2):579-585. (in Chinese)

周前飞, 刘晶红, 居波, 等. 面阵CCD航空相机斜视图像的几何校正[J]. 液晶与显示, 2015, 30(3):505-513. ZHOU Q F, LIU J H, JU B, et al.. Geometric correction of oblique images for array CCD aerial cameras[J]. Chinese Journal of Liquid Crystals and Displays, 2015, 30(3):505-513. (in Chinese)

康玉思, 田志辉, 刘伟奇, 等. 激光显示广角球幕投影镜头设计[J]. 液晶与显示, 2014, 29(3):333-338. KANG Y S, TIAN ZH H, LIU W Q, et al.. Wide-angle dome-screen projection lens design of laser display[J]. Chinese Journal of Liquid Crystals and Displays, 2014, 29(3):333-338. (in Chinese)

任秉文, 金光, 张元, 等. 畸变对TDI成像相机的像移影响研究[J]. 红外与激光工程, 2014, 43(12):3951-3957. REN B W, JIN G, ZHANG Y, et al.. Influence of image motion on TDI imaging camera by distortion effect[J]. Infrared and Laser Engineering, 2014, 43(12):3951-3957. (in Chinese)

RICOLFE-VIALA C, SÁNCHEZ-SALMERÓN A. Using the camera pin-hole model restrictions to calibrate the lens distortion model[J]. Optics & Laser Technology, 2011, 43(6):996-1005.

WENG J, COHEN P, HERNIOU M. Camera calibration with distortion models and accuracy evaluation[J]. IEEE Transactions on Pattern Analysis and Machine Intelligence, 1992, 14(10):965-980.

WANG Z, KIEU H, NGUYEN H, et al.. Digital image correlation in experimental mechanics and image registration in computer vision:Similarities, differences and complements[J]. Optics and Lasers in Engineering, 2015, 65:18-27.

赵鹏. 机器视觉研究与发展[M]. 北京:科学出版社, 2012. ZHAO P. The Research and Development of Machine Vision[M]. Beijing:Mammalia Science Press, 2012. (in Chinese)

LIU W, DU J, WANG B, et al.. Field Calibration Method of Camera for Measuring the Dimensions of Large Forging[M]. Springer Berlin Heidelberg:Intelligent Robotics and Applications, 2010:285-295.

杨长江, 汪威, 胡占义. 一种基于主动视觉的摄像机内参数自定标方法[J]. 计算机学报, 1998, 21(5):428-435. YANG CH J, WANG W, HU ZH Y. An active vision based camera intrinsic parameters self-calibration technique[J]. Chinese Journal of Computers, 1998, 21(5):428-435. (in Chinese)

浏览量

1073

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

电力巡检中的偏振图像特征融合

基于机器视觉的透明软管内微量液体体积测量

基于多位姿标靶的激光跟踪姿态测量系统参数标定

任意位姿圆柱曲面透视投影失真的图像校正

太阳辐照度测量中孔径光阑衍射效应