齿轮误差三维评定方法

张白; 石照耀; 林家春

doi:10.3788/OPE.20162402.0390

您当前的位置：

首页 >

文章列表页 >

齿轮误差三维评定方法

微纳技术与精密机械 | 更新时间：2020-08-13

- 齿轮误差三维评定方法
- Three-dimensional coordinate evaluation method of gear errors
- 光学精密工程 2016年24卷第2期页码：390-397
- 作者机构：
  
  1. 北京工业大学机械工程与应用电子技术学院北京,100124
  2. 北方民族大学电气信息工程学院,宁夏银川,750021
- 作者简介：
- 基金信息：
  
  国家科技重大专项基金资助项目(No.2010ZX04014-091)();宁夏自然科学基金重点项目(No.NZ14098)()
- DOI：10.3788/OPE.20162402.0390
  中图分类号： TG86
- 收稿日期：2015-08-03，
  
  修回日期：2015-10-20，
  
  纸质出版日期：2016-02-25
- 稿件说明：
移动端阅览
张白, 石照耀, 林家春. 齿轮误差三维评定方法[J]. 光学精密工程, 2016,24(2): 390-397

ZHANG Bai, SHI Zhao-yao, LIN Jia-chun. Three-dimensional coordinate evaluation method of gear errors[J]. Editorial Office of Optics and Precision Engineering, 2016,24(2): 390-397
张白, 石照耀, 林家春. 齿轮误差三维评定方法[J]. 光学精密工程, 2016,24(2): 390-397 DOI： 10.3788/OPE.20162402.0390.

ZHANG Bai, SHI Zhao-yao, LIN Jia-chun. Three-dimensional coordinate evaluation method of gear errors[J]. Editorial Office of Optics and Precision Engineering, 2016,24(2): 390-397 DOI： 10.3788/OPE.20162402.0390.

摘要

研究了齿轮误差三维评定方法

以消除测量仪器定位误差对齿轮误差评定的影响

提高齿轮测量仪器的测量精度。分析了传统齿轮二维评定方法的弊端

提出将齿轮误差评定从二维评定模式转变为三维评定模式。该评定模式不再要求齿轮各项误差测量点位于特征面内

实现了三维空间内的齿轮误差测量与评定。为提高齿轮三维误差评定算法的效率

通过螺旋降维方法将三维数据降至二维数据

再对二维测量数据进行各项误差的评定。以特大型齿轮激光跟踪在位测量系统作为实验对象

对4级标准齿轮的齿廓误差进行了测量

并与传统的齿轮二维误差评定方法以及德国ZEISS公司InvolutePro软件的评定结果进行了对比。结果表明:传统齿轮二维误差评定方法有较大误差

三维齿廓评定方法与德国ZEISS公司InvolutePro软件评定结果一致

精度达到0.1μm

证明了提出的齿廓误差三维评定方法完全正确

可以消除仪器定位误差对测量结果的影响

提高了测量仪器的测量精度。

Abstract

A three-dimensional coordinate evaluation method for gear errors was explored to eliminate the influence of positioning error of a measurement instrument on the measurements and evaluations of a gear and to improve the measuring accuracy. The traditional two-dimensional gear error evaluation method was analyzed

and then the gear error evaluation model was changed from two-dimensional evaluation model into three-dimensional evaluation model. In the three-dimensional evaluation model

the measurement points of gear error were not required in the characteristic surface

and error measurement and evaluation of gear could be realized in a three-dimensional space. Furthermore

to improve the efficiency of three-dimensional evaluation algorithm of gear errors

three-dimensional data were reduce to two-dimensional data by using spiral dimensionality reduction method

and the error evaluation of two-dimensional measurement data were carried out. By taking the in-site measurement system with laser tracker for megagear as an experimental object

the profile error of a 4 level standard gear was measured

and obtained results were compared with that of the traditional two-dimensional gear error estimation method and the evaluation results from the InvolutePro software of German ZEISS company. The experimental results indicate that the traditional two-dimensional evaluation method has a bigger error

but the proposed three dimensional evaluation method can obtain the same evaluation results with the software of InvolutePro of German ZEISS company

and the algorithm precision reaches 0.1μm. The results verify that proposed three dimensional evaluation method is correct. It eliminates the influence of instrument positioning precision on gear error measurement and improves the measurement precision of gear measuring instruments.

关键词

Keywords

references

GOCH G. Gear metrology[J]. CIRP Annals-Manufacturing Technology, 2003, 52(2):659-695.

柏永新.齿轮精度与综合检验[M]. 上海:上海科学技术出版社,1986. BAI Y X. Gear Accuracy and Comprehensive Inspection[M]. Shanghai:Shanghai Scientific & Technical Publishers,1986.(in Chinese)

石雪梅.基于齿轮测量中心的渐开线圆柱齿轮的测量与评定[D]. 天津:天津大学,2009. SHI X M. Measurement and evaluation of involute cylindrical gear based on gear measurement center[D].Tianjin:Tianjin University,2009.(in Chinese)

LOTZE W. Zahnradmessung Mit Koordinaten Messgeräten[M]. Dresden, Germany:Eigenverlag,2006.

石照耀, 张宇, 张白. 三坐标机测量齿轮齿廓的不确定度评价[J]. 光学精密工程,2012,20(4):766-771. SHI ZH Y, ZHANG Y, ZHANG B. Uncertainty evaluation of CMM measurement for gear profile[J]. Opt. Precision Eng., 2012, 20(4):766-771.(in Chinese)

张白.特大型齿轮激光跟踪在位测量系统及关键技术研究[D]. 北京:北京工业大学,2013. ZHANG B. Research on key technology and measurement system of in-site measurement system with laser tracker for mega gear[D]. Beijing:Beijing University of Technology, 2013.(in Chinese)

石照耀,张白,林家春,等. 特大型齿轮激光跟踪在位测量原理及关键技术[J]. 光学精密工程,2013,21(9):2340-2347. SHI ZH Y, ZHANG B, LIN J CH, et al.. Principle and critical technology of in-site measurement system with laser tracker for mega gear[J]. Opt. Precision Eng., 2013,21(9):2340-2347.(in Chinese)

HÄRTIG F,KRYSTEK MP,KLEIN S.Reliable detection of periodic micro structures on open surfaces[J]. Key Engineering Materials, 2008, 381-382:15-18.

石照耀,林虎. 齿轮误差多自由度理论[J]. 机械工程学报,2013,50(1):55-60. SHI ZH Y, LIN H. Multi-degrees of freedom theory for gear deviation[J]. Journal of Mechanical Engineering, 2013,50(1):55-60.(in Chinese)

宋远,叶寒,涂海宁. 运动误差对齿轮螺旋线偏差测量的影响[J]. 机械设计与制造,2013,(7):129-130. SONG Y, YE H, TU H N. The influence about motion error on gear helix deviation measurement[J]. Machinery Design & Manufacture, 2013,(7):129-130.(in Chinese)

李春,刘书桂. 三坐标测量机的测头半径补偿与曲面匹配[J]. 仪器仪表学报,2003,24(4):145-147. LI CH, LIU SH G. The probe radius compensation of free-form surface and surface matching[J]. Chinese Journal of Scientific Instrument, 2003,24(4):145-147.(in Chinese)

张白,石照耀,林家春. 齿轮激光跟踪在位测量的姿态调整模型[J]. 哈尔滨工程大学学报,2014,35(5):607-612,636. ZHANG B,SHI ZH Y, LIN J CH. Attitude adjustment models of an in-site gear measurement system with a laser tracker[J]. Journal of Harbin Engineering University,2014,35(5):607-612,636.(in Chinese)

浏览量

351

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

计算全息补偿检测自由曲面的高精度位姿测量

结合互相关和B样条插值的激光三角光斑定位

面向特大型齿轮的激光跟踪多站位定位

特大型齿轮激光跟踪在位测量原理及关键技术